Moulding adds interest to the layout of a room, offering nature and depth that will raise the worth of your property. Moulding comes in wood, ceramic and faux varieties, but the processes will be the same for each substance. When installing moulding caulk is not needed, but it helps remove lines of separation between the wall and the ceiling and creates corners and neater joints.
Use painter’s tape to the very top of the wall on the opposite side and also to the edge of the moulding on a single side. Leave about 1/4 to 1/8 inch between the two strips of painter’s tape for the caulking. Painter’s tape supplies a straight-line for the caulking and helps decrease undesirable caulk drips. Select obvious, coloured or paintable caulk to co-ordinate by means of your room layout.
Add the caulk tube to the gun and cut the end of the tube off. Tim Carter, of the syndicated column “Ask the Builder,” advocates cutting the hole in the tube about 60 to 70% the size of the seam you are looking to make. Apply caulking to the region involving the wall as well as the moulding. Take advantage of your finger to spread and smooth the caulking equally. Work – to 3-foot sections, re-applying and smoothing as you go. Make use of a cloth to wipe away extra caulk.
Use caulking to join one wall to another. Better Homes and Gardens on the web proposes using wood or caulking filler in the corner where two parts of moulding meet. Use a bit of caulking to the corner seam after the moulding is in position. Take advantage of your finger to smooth the region, making a smooth transition across the outside of the space.
